There are many factors,
other than chemical resistance, to consider when selecting
an Enviroline® Series protective coating or
lining. Specific technical information such as operating temperatures;
temperature cycling; vessel design and accessibility; type
of substrate; surface preparation; and physical requirements
for abrasion and impact resistance.
The information presented here
is to be used as a guide to preliminary selection and an indication
of the chemical resistance range of Enviroline Series protective
coatings and linings.
The data published in
this guide was derived by conducting immersion tests in closed
containers using 2" x 4" x 1/8" steel panels
coated with the specific product at the mil thickness recommended
for immersion service. The test panels were cured for seven
(7) days at 77°F and were unaffected by the following
products after one (1) year immersion at ambient temperature.
Full cure times vary and can mostly be obtained in less than
7 days. Achieving desired hardness, as indicated on the
Product
Information page or on the Product
Information Bulletin, is sufficient to ensure full cure. The
coating may be put into service once full cure is obtained.
|
